Astro Machine AstroJet M1 Guide de dépannage télécharger pdf (Page 41)

SECTION 4

MAINTENANCE

Replacing the Service Station

The Service Station is designed provide a long service life. However, should it need to be replaced, follow

these steps. The Service Station is located above the Ink Tank Station.

TURN PRINTER POWER OFF.

CAUTION

WHENEVER POWERING DOWN UNIT, ALWAYS:

1. PRESS THE POWER BUTTON ON THE CONTROL PANEL.

2. WAIT FOR THE PRINTER TO STOP PROCESSING.

3. THEN PRESS THE MAIN POWER SWITCH ON THE REAR PANEL.

1. Open the Front Cover (hinged at bottom).

Remove the Exit Roller Cover by removing the four

(4) screws. Open the Top Cover.

2. Slide the Service Station out of the Service Station

port. NOTE: Do not pull Station all the way out

until you disconnect the Ribbon Cable.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

Pas de commentaire

Astro Machine AstroJet M1 Guide de dépannage Page 41