Astro Machine AstroJet M1 Guide de dépannage télécharger pdf (Page 18)

SECTION 2

INSTALLING THE PRINTER

3. Open the Ink Tank Door (hinged at

bottom). Open the three Latches [A].

4. Remove the Ink Tank(s) from packaging.

5. Insert the Ink Tanks (labels up) into their

appropriate color slots [B]. Close the three

Ink Tank Latches.

INSTALLATION TIP: Make sure the

Ink Tanks seat properly. Insert the Ink

Tank into the appropriate Ink Station,

then pull the Ink Tank back about an

inch and push forward firmly to insure

that the Ink Nozzles penetrate the seals

on the Ink Tanks.

6. Click “Continue” on the Confirm

screen, then “Refresh Ink Levels” on

the User Interface screen. The ink

colors fill in as the Ink Tanks are

installed. If the ink colors do not fill in

after a few seconds, click “Replace Ink

Tanks” again and reinstall the Ink

Tank(s).

7. Close the Front Cover.

WARNING!

The ink in the Ink Tanks may be harmful if swallowed. Keep new and used

Tanks out of reach of children. Discard empty tanks immediately.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 67 68

Pas de commentaire

Astro Machine AstroJet M1 Guide de dépannage Page 18